Custom 1996 Bobbed M35A3 4x4 shorty 2.5 ton Cat turbo diesel Allison Auto trans

Mon, 02/06/2012 - 15:24 -- editor
Price: 
$17 449.00

 

Up for sale is another custom bobbed M35A3 built by C&C Equipment. We are the premier builder of custom 2.5 ton trucks and your 2.5 ton parts source. This is a 1996 model M35A3 that we have went through, We started with a clean stock 6x6 out of over 30 I have here shortened it up 3' and installed a clean 2006 model M105 9' bed and custom springs with all new hardware. It has a new custom built longer driveshaft [not lengthened like some] with bigger stronger u-joints. Hubs have been flipped on the rear and it is running a set of my custom 20x10 wheels on 95% plus Michelin 15.5xR20 XL tires that are 46.4" tall and 15.5" wide giving it a great stance. This also helps out on the top speed of 62+ mph instead of the stock 55mph. The truck has been checked out all over, seals get fixed where needed, brakes, lights etc.. The truck has many new parts like top, drivers seat, tires and wheels, driveshaft, etc... I keep all the parts in stock for these trucks so if it needs it, it gets put on, no covering anything up because you don't have something. The truck starts and runs great, it has the 175hp Cat 3116 diesel in it with turbo. Behind that is the Allison 4 speed automatic transmission that shifts great sending power to a Rockwell divorced airshift transfer case that works fine.  Truck is showing 11,500 miles and 1200 hours.
 
The A3's have some more creature comforts over the older A2 series, like air assist steering, better drivers seat, 3 point seat belts, higher Hp Cat diesel, auto transmission, in cab heater, insulation in cab and under hood, muffler, smaller steering wheel for more cab room, split braking system, etc..
 
The whole truck cab and chassis were painted along with the bed separate and finished out in the current 3 color camo pattern. The body is very clean and straight on this truck. The soft top is new so it will last you for years to come. The truck has been painted top to bottom with over 4 gallons of paint.
 
We take pride in building these trucks and it shows in our work. Our trucks tend to be nicer than most you will find out there. We pay attention to the details and spare no $ when redoing these. Check around I will be higher than most but you get what you pay for. Trust me, I get customers who try to save a few bucks and buy one from a guy who built one for the first time something you never want to do, and they come back to me buying parts to fix it and make it right spending money and time. I have built over 30 of these custom trucks like this including custom crew cabs, we cut no corners. If your looking for a nice truck ready to show and go and impress your friends here it is.
 
 I sell around 100 units each year so I know my way around these. If you have any questions e-mail me or you can call 812-336-2894. Best time to reach me {Clinton} is from 3:30-5pm during the week and on weekends the rest of the time I am in the shop working on these trucks. Bridgette works the phones during the rest of the time taking part orders and general questions.
 
We can add items to this truck like:
 
New factory steel hardtop $1500 installed
 
New Avm lockout hubs $525 installed - highly recommended, helps with fuel mileage and steering
 
Fullsize spare tire and wheel $625
 
Tire only $250
 
Good used racks and bows for the bed $300
 
Good used solid green top for bed $200
 
New matching camo top for bed $600
 
There are other items also, check out my ebay store for over 200 more items 
 
Truck comes with a clean Indiana state title ready for you to take over. Drive the truck home, or I recommed having it shipped. I work with several diffrent shipping companys that I can set you up with or I can take care of everything for you. Figure around $1.50 a loaded mile for the longer trips like 1500miles+ Under that you will be looking at $1.75-2.25 a loaded mile with a 600 minium. Your location will have allot to do with the price. Truck weight is 10,500lbs its 22' overall, 9' tall and 8' wide.
 
 
 
All Items sold as is where is. We will try to make things right with you if you happen to have a problem shortly after the sale.
 
Any questions call us at 812-336-2894 or e-mail us @ dirtdigger_97@sbcglobal.net be sure to check us out on the web.                      We do build custom trucks to order.
Category: 

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Argo 8x8

The amphibious ARGO UTV has proven itself as a reliable off-road vehicle in some of the world's most remote regions. The all season ARGO 8X8 seats up to six passengers and performs when other vehicles can't get the job done. The all terrain ARGO is the vehicle of choice for big game and waterfowl hunting, outfitters, property owners and adventure tour operators. >>