1980 M814 6x6 dump truck w/16' bed 250hp Cummins 1989 rebuild

Up for sale here is a clean 1980 AM General M814 5 ton 6x6 dump truck. Its showing 17,496 miles and 625 hours. Truck has went through the shop and has been checked out, sandblasted, painted and is ready for service. The truck runs out excellent, it has the the 250Hp 855 cubic inch NHC-250 Cummins in it which starts and runs well. Behind that is a Spicer 5 speed overdrive transmission driving a 2 speed rockwell transfer case. The axles are rockwell double reduction with 6.44 gears. The rears are rated at 44,000lbs. The overall shape of the truck is excellent. The bed is solid, it does have a few dents from hauling but nothing big. The M814 used to be cargo truck, we installed the used 16' commercial dump bed with air operated tailgate. It has a new hydraulic pump and controls. These are very tough trucks and really shine off road being 6 wheel drive and the suspension will handle any uneven terrain with ease. The truck has very nice power steering that you can turn with one finger. The bed is 16' long with 42" tall steel sides. These trucks have plenty of power thanks to the low range of the transfer case. the truck is double framed also. You can plow mud all day long with the axles and these trucks will keep on going. The trucks will handle everything you can stack in them and more. So if your looking for a good clean dump, here it is. These will last a long time and are very rugged. Empty weight is 25,000 lbs I specialize in the 2.5 and 5 ton trucks. I have a complete line of parts in stock for these trucks new and used.

Check out my other items! I have had hundreds of these trucks over the past few years and keep 20+ in stock all the time.

This truck comes with a Indiana state title.

It can be sold to a US citizen only.

I can ship this at buyers cost, it is 10'-8" tall and 27' long. It will have to go on a RGN lowboy so figure around $3.50 a loaded mile for shipping from 47468.

I have several 5 ton trucks and a complete parts line avaliable.

You can also drive the truck home if you would like.

All trucks sold as is where is. $15 per day storage fee will be implied on all trucks after 14 days of auction. Payment to be made in full by bank wire, cash or bank check in 5 days or less. any questions, e-mail or you can call 812-336-2894 8-4:30 est

We can upgrade this truck to 6- 14.00-R20 super single tires and wheels for $2500 extra This truck is titled as a 1971 model but is actually a 1980. It used to be a ex DNR truck and they had the year wrong. It had a complete government rebuild in 1989.

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>