1994 American General 2.5 Ton M35A3 6x6 Truck With Winch and Fresh Paint

Up for sale is a 1994 AM General M35A3 2.5 ton truck. This truck is very clean inside and out. Its showing 1225 hours and 9800 miles which look to be true. We have ran this through our shopped, checked everything, installed new parts as needed. The 14.5-R20 Michelin XL's are 80% or better on rubber. This is a rust free truck with new paint on it. This truck comes with a winch, drop side bed and a fiberglass hood. The M35A3's are rebuilt M35A2 trucks with almost everything being brand new on them. There is alot of upgrades from the A2 series that make them a more operator friendly. There was 5600 of these redone from 1993-1999 so these are rare truck that the value will continue to go up on. Anyone can drive these trucks they do not require a CDL. empty weight is 14,000lbs and the GVW is 24,000lbs These trucks will last a long time with proper maintainace.

We have the hoists avaliable if you want to set up your truck as a dump. These trucks will carry 10,000lbs safetly without issues. I set these up with a steep dump angle so the material will come out.

Here are some of the upgrades from the A2 models

- Drop side bed - Fiberglass hood

- Automatic transmission

- Air power-assisted steering

- Central inflation system works

- Three-point seat belt safety system

- 3116 turbo charged Caterpillar, 170-horsepower engine

- AT1545P automatic 4 speed transmission

-2 speed transfer case Rockwell T-136

- Electric Wipers with windshield washer

- In cab coolant heater works better than older style

- Muffler and insulated cab and hood

- extra marker lights with backup lights

- smaller steering wheel for more cab room.

- upgraded drivers seat

- super single tires and wheels.

I specialize in the 2.5 ton trucks we do custom builds like crew cabs, bobbed trucks etc. I also stock 5 ton and up trucks as well. I have a complete line of parts in stock for these trucks new and used. I also sell front lockout hubs which make a huge improvement on steering, driving and fuel mileage on these trucks.

For more information call 812-336-2894

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>