2005 John Deere 450J long track Low hours clean one owner tractor VIDEO!!!!!SOLD!!!!!!!!!!!!!!!!!!

 
Up for sale is a clean low hour 2005 John Deere 450J long track dozer. This was a one owner machine that has been taken care of. Machine starts and runs like it should, without any issues. It is straight and clean all over with no dents in sheet metal. It has the 70hp 4.5L Deere power tech engine that has no blowby. The Hydro-static transmission operates and turns like it should. Blade is tight also. Undercarriage is at 70% the rails and sprockets are almost new. Meter reads 5100 hours. There is no leaks, machine is ready to go to work today. 
This is a long track machine making it grade better.
It has 16" wide pads and the blade is 8'-1" wide.
machine weight is 17000lbs
We can ship this anywhere so call or e-mail for a quote. 812-336-2894 mon-fri 8-4:30
Indiana 7% sales tax applies to all buyers, unless you are tax exempt, or it is shipped out of state by a third party shipper, not affiliated with you.   
 
We do have 2 different 450J tractors to chose from 
 
I have several other machines for sale Check out my other items!
 
 
 
 
 
 
 
 
Engine 450J LT / 450J LGP
Blade Type Power Angle Tilt (PAT)
Manufacturer and Model John Deere PowerTech™ M 4045
Displacement 4.5 L (276 cu. in.)
SAE Net Rated Power 52 kW (70 hp) at 2,200 rpm
Net Peak Torque 316 Nm (233 lb.-ft.) at 1,200 rpm
Aspiration Turbocharged with charge air cooler
Air Cleaner Dual-stage dry tube with tangential unloader
Slope Operation, Maximum Angle 45-deg. fore-aft / 30-deg. side slope
Cooling
Type Blower-type cooling fan
Engine Coolant Rating –37 deg. C (–34 deg. F)
Engine Radiator 10 fins per in.
Powertrain
Transmission Automatic, dual-path, hydrostatic drive; load-sensing feature automatically adjusts speed and power to match changing 
load conditions; each individually controlled track is powered by a variable-displacement piston pump and 2-speed motor 
combination; ground-speed selection buttons on single-lever steering and direction control; independently selectable 
reverse speed ratios of 100% ,115%, or 130% of forward ground speed; decelerator pedal controls ground speed to stop
 System Relief Pressure 44 470 kPa (6,450 psi)
 Travel Speeds
 Forward and Reverse 8.0 km/h (5.0 mph)
 Maximum (optional) 9.7 km/h (6.0 mph)
Steering Single-lever steering, direction control, and counterrotation; full power turns and infinitely variable track speeds provide 
unlimited maneuverability and optimum control; hydrostatic steering eliminates steering clutches and brakes
Final Drives Triple-reduction final drives mounted independently of track frames and dozer push frames for isolation from shock loads
 Total Ratio 48.4 to 1
Drawbar Pull
 Maximum 118 kN (26,500 lb.)
 At 1.9 km/h (1.2 mph) 64 kN (14,400 lb.)
 At 3.2 km/h (2.0 mph) 39 kN (8,700 lb.)
Brakes
 Service Hydrostatic (dynamic) braking stops the 
machine whenever direction-control lever 
is moved to neutral or the decelerator is 
depressed to the detent
 Parking Exclusive spring-applied, hydraulically 
released park brake feature engages wet, 
multiple-disc brakes automatically when- 
ever the engine stops, the operator 
depresses the decelerator pedal to the 
brake position, the unit is in neutral for 
3 seconds (with detected motion), or the 
park-lock lever is in the park position; 
machine cannot be driven with brake 
applied, minimizing wearout or need for 
adjustment
Hydraulics
Type Open-center hydraulic system with fixed-displacement gear pump
Pump Displacement 26 cc
System Relief Pressure 20 684 kPa (3,000 psi)
Maximum Flow at Unloaded High Idle 57 L/m (15 gpm)
Control 3-function direct-acting T-bar joystick
Voltage 12 volts
Battery Capacity 950 CCA
Reserve Capacity 190 min.
Alternator Rating
 Cab 90 amp
 Canopy 70 amp
Lights Grille mounted (2), rear mounted (1), and rear reflectors (2)
Undercarriage 450J LT 450J LGP
Blade Type PAT PAT
Tracks John Deere Dura Trax™ features large deep-heat-treated, sealed, and lubricated track links and through-hardened, sealed, and 
lubricated rollers for maximum wear resistance; sprockets are segmented; extreme-duty shoes are available (on some models) 
for severe applications
 Track Gauge 1448 mm (57 in.) 1651 mm (65 in.)
 Grouser Width 406 mm (16 in.) 610 mm (24 in.)
 Chain Sealed and lubricated Sealed and lubricated
 Shoes, Each Side 40 40
 Track Rollers, Each Side 6 6
 Track Length On Ground 2184 mm (86 in.) 2184 mm (86 in.)
 Ground Contact Area 17 755 cm2
 (2,752 sq. in.) 26 632 cm2
 (4,128 sq. in.)
 Ground Pressure 40.7 kPa (5.90 psi) standard / 41.3 kPa (5.99 psi) Maximum Life 29.3 kPa (4.30 psi) standard / 29.8 kPa (4.32 psi) Maximum Life
 Track Pitch 160 mm (6.3 in.) standard / 171 mm (6.7 in.) Maximum Life 160 mm (6.3 in.) standard / 171 mm (6.7 in.) Maximum Life
Operator Station 450J LT / 450J LGP
ROPS (ISO 3471 – 2008) and FOPS (ISO 3449 – 2005)
Serviceability
Refill Capacities
 Fuel Tank with Lockable Cap 178 L (47 gal.)
 Cooling System with Recovery Tank 16 L (4.2 gal.)
 Engine Oil with Filter 14 L (15 qt.)
 Transmission Reservoir with Filter 43 L (11.3 gal.)
 Hydraulic Reservoir and Filter 32.2 L (8.5 gal.)
Operating Weights 450J LT 450J LGP
Blade Type PAT PAT
Base Weight (with standard equipment, 
rollover protective structure [ROPS], full 
fuel tank, and 79-kg [175 lb.] operator)
7386 kg (16,283 lb.) 7949 kg (17,525 lb.)
 
Machine Dimensions 450J LT 450J LGP
Blade Type PAT PAT
A Overall Height to Roof 2747 mm (9 ft. 0 in.) 2747 mm (9 ft. 0 in.)
B Tread Depth with Single-Bar Grouser 49 mm (1.9 in.) 49 mm (1.9 in.)
C Ground Clearance in Dirt 345 mm (13.6 in.) 345 mm (13.6 in.)
D Overall Length 3940 mm (155 in.) (12 ft. 11 in.) 4013 mm (158 in.) (13 ft. 2 in.)
E Blade Lift Height 772 mm (30.4 in.) 772 mm (30.4 in.)
F Blade Digging Depth 528 mm (20.8 in.) 528 mm (20.8 in.)
G Blade Cutting-Edge Angle, Adjustable 52 to 60 deg. 52 to 60 deg.
Width Over Track
Straight
H Blade Width 2464 mm (97 in.) 2921 mm (115 in.)
I Blade Height 955 mm (3 ft. 2 in.) 955 mm (3 ft. 2 in.)
SAE Capacity 1.6 m3
 (2.1 cu. yd.) 2.0 m3
 (2.6 cu. yd.)
Weight 494 kg (1,090 lb.) 628 kg (1,385 lb.)
C-Frame Assembly Weight (without 
blade)
330 kg (727 lb.) 330 kg (727 lb.)
J Blade Angle 25.4 deg. 25.4 deg.
K Overall Width with Blade Angled 2225 mm (7 ft. 4 in.) 2639 mm (8 ft. 8 in.)
L Blade Tilt (uses tilt jack) 338 mm (13.3 in.) 399 mm (15.7 in.)
M Cut Reach 56 mm (2.2 in.) 58.4 mm (2.2 in.)
N Width Over Track 1854 mm (6 ft. 1 in.) 2261 mm (7 ft. 5 in.)
O Cast Reach 318 mm (12.5 in.) 320 mm (12.6 in.)Machine Dimensions (continued) 450J LT 450J LGP
Blade Type PAT PAT
Straight (option)
H Blade Width 2921 mm (115 in.) 3150 mm (124 in.)
I Blade Height 955 mm (3 ft. 2 in.) 894 mm (35 in.)
SAE Capacity 2.0 m3
 (2.6 cu. yd.) 1.9 m3
 (2.5 cu. yd.)
Weight 628 kg (1,385 lb.) 631 kg (1,391 lb.)
C-Frame Assembly Weight (without 
blade)
330 kg (727 lb.) 330 kg (727 lb.)
J Blade Angle 25.4 deg. 25.4 deg.
K Overall Width with Blade Angled 2639 mm (8 ft. 8 in.) 2845 mm (9 ft. 4 in.)
L Blade Tilt (uses tilt jack) 399 mm (15.7 in.) 429 mm (16.9 in.)
M Cut Reach 262 mm (10.3 in.) 163 mm (6.4 in.)
N Width Over Track 1854 mm (6 ft. 1 in.) 2261 mm (7 ft. 5 in.)
O Cast Reach 523 mm (20.6 in.) 424 mm (17 in.)
All machines are sold as is where is with no warranty. Seller makes no guarantee on year or hours on machine. Machines to be paid in full before shipping. Payment to be made in full within 5 days or less by cash, certified funds, or bank wire
 

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

Argo 8x8

The amphibious ARGO UTV has proven itself as a reliable off-road vehicle in some of the world's most remote regions. The all season ARGO 8X8 seats up to six passengers and performs when other vehicles can't get the job done. The all terrain ARGO is the vehicle of choice for big game and waterfowl hunting, outfitters, property owners and adventure tour operators. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>