1982/2007 International Dresser M10A 530 ex- military wheel loader 210 hrs video!!!!!!!!!!!!SOLD!!!!!!!!!

Up for sale is a 1982 International Dresser M10A wheel loader. This is the same basic machine as the Dresser 530 wheel loader. This Unit has a 2007 complete rebuild on it. when the military does this, they redo everything, rebuilding and replace all parts so its basically like a new one. The machine probably only has 1500 hours or less on it when they rebuilt it, it has only 210 hours on it since the rebuild. its powered by the International DT414 turbocharged diesel rated at 165hp. It has a 3 speed powershift transmission that shifts and pulls strong. This unit is set up with a Hyster fork carriage, that tilts, sideshifts, and the forks slide in and out all hydraulically. This makes it very handy as a forklift. It has extra counter weights on the back to compensate for extra heavy loads. Its rated to lift 10,000lbs. The 20.5-25 tires are in like new shape. It has a clean cab, everything was new in 2007,  all gauges along with service brakes and parking brakes. 

 
machine weight is 36,500lbs
344" long with forks
131" tall
101" wide
forks are 72" long x 8' wide
It lifts to 121.6"
A bucket could be installed if needed. used ones are available on places like machinery trader, under Dresser 530 parts machines.
These are a great simple machine that make an excellent forklift. I have run and had several of these in the past.
We can ship anywhere in the lower 48 states figure about $3-3.50 a loaded mile from 47468
Indiana 7% sales tax applies to all buyers, unless you are tax exempt, or it is shipped out of state by a third party shipper, not affiliated with you. 
All machines are sold as is where is with no warranty.  Machines to be paid in full before shipping. Payment to be made in full within 5 days or less by cash, certified funds, or bank wire. 
Call 812-336-2894 for any questions you have or emails us.
Check out my other items

{C}

{C}

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>