ASV Posi Trac RC100 Skid Steer Loader CAT ENG FULL CAB W/AIR HIGH FLOW with elec!!!!!!!!!!SOLD!!!!!!!!!!!!

Up for sale is a clean one owner ASV RC100 tracked skid steer it dose come fully loaded with heat and AC, high flow aux hydraulics with electrics,  all original paint, tracks are around 80 % , This is one good solid machine, starts and runs in the cold with no problems. it has had the hour meter replaced at 1840 hours and an aftermarket gauge installed showing 15 hours, feel free to come check it out you will have a hard time finding a nicer machine 

Comes with the bucket shown in the pictures and video 
thanks C&C Equipment
812-336-2894 

Selected Dimensions

Dimensions
A. LENGTH W/ BUCKET 12.3 ft in 3760 mm
B. WIDTH OVER TRACKS 1.5 ft in 457 mm
C. HEIGHT TO TOP OF CAB 6.6 ft in 2023 mm
E. GROUND CLEARANCE 14 in 356 mm
F. LENGTH W/O BUCKET 9.8 ft in 2985 mm
Undercarriage
D. LENGTH OF TRACK ON GROUND 6 ft in 1842 mm

Specification

Engine
MAKE Perkins
MODEL 1104C -44T
GROSS POWER 99.5 hp 74 kw
POWER MEASURED @ 2300 rpm
PEAK TORQUE 304 lb ft 412 Nm
DISPLACEMENT 268 cu in 4.4 L
ASPIRATION Turbocharged
Operational
OPERATING WEIGHT 10150 lb 4604 kg
FUEL CAPACITY 26 gal 98 L
COOLING SYSTEM FLUID CAPACITY 3.1 gal 12 L
ENGINE OIL CAPACITY 8.5 gal 8 L
HYDRAULIC SYSTEM FLUID CAPACITY 20 gal 76 L
MAX SPEED - LOW RANGE 6 mph 9.7 km/h
MAX SPEED - HIGH RANGE 11.5 mph 18.5 km/h
Undercarriage
GROUND CONTACT AREA 2610 in2 1.7 m2
GROUND PRESSURE 3.5 psi 24 kPa
NUMBER OF TRACK ROLLERS PER SIDE 21
LENGTH OF TRACK ON GROUND 6 ft in 1842 mm
WIDTH OF TRACK 14 in 356 mm
Loader
OPERATING LOAD 3800 lb 1724 kg
TIPPING LOAD 7600 lb 3447 kg
Hydraulic
PUMP FLOW 38 gal/min 144 L/min
RELIEF VALVE PRESSURE 3300 psi 22737 kPa
Dimensions
WIDTH OVER TRACKS 1.5 ft in 457 mm
LENGTH W/ BUCKET 12.3 ft in 3760 mm
LENGTH W/O BUCKET 9.8 ft in 2985 mm
HEIGHT TO TOP OF CAB 6.6 ft in 2023 mm
GROUND CLEARANCE 14 in 356 mm

 

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

Argo 8x8

The amphibious ARGO UTV has proven itself as a reliable off-road vehicle in some of the world's most remote regions. The all season ARGO 8X8 seats up to six passengers and performs when other vehicles can't get the job done. The all terrain ARGO is the vehicle of choice for big game and waterfowl hunting, outfitters, property owners and adventure tour operators. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>