2004 ASV Posi-Track RC-60 Track Skid Steer pitot controls !!!!!!!!!SOLD!!!!!!!!

Up for sale is a nice mid size tracked skid loader ASV RC60 Comparable to the Cat 247 

Pilot controls, open rops, starts and runs very well, tracks are 50% still a lot of life left in this machine 
only 2650 hours! Job sight ready 
feel free to call or email with any questions or for a shipping Quote 
Thanks C&C Equipment 
812-336-2894 
Blow are some specks and a short video 
 

Selected Dimensions

Dimensions
A. LENGTH W/ BUCKET 10.7 ft in 3251 mm
B. WIDTH OVER TRACKS 5 ft in 1524 mm
C. HEIGHT TO TOP OF CAB 6.4 ft in 1956 mm
E. GROUND CLEARANCE 12 in 305 mm
F. LENGTH W/O BUCKET 8.3 ft in 2540 mm
Undercarriage
D. LENGTH OF TRACK ON GROUND 4.9 ft in 1499 mm
I. TRACK GAUGE 3.8 ft in 1143 mm

Specification

Engine
MAKE Perkins
MODEL 404C-22T
GROSS POWER 60 hp 44.7 kw
POWER MEASURED @ 2800 rpm
PEAK TORQUE 140 lb ft 189.8 Nm
DISPLACEMENT 134 cu in 2.2 L
ASPIRATION turbocharged
Operational
OPERATING WEIGHT 6200 lb 2812.3 kg
FUEL CAPACITY 15 gal 56.8 L
COOLING SYSTEM FLUID CAPACITY 2 gal 7.6 L
ENGINE OIL CAPACITY 2.8 gal 10.6 L
HYDRAULIC SYSTEM FLUID CAPACITY 8 gal 30.3 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 55 amps
MAX SPEED - HIGH RANGE 8 mph 12.9 km/h
Undercarriage
GROUND CONTACT AREA 1767 in2 1.1 m2
GROUND PRESSURE 3.5 psi 24.1 kPa
NUMBER OF TRACK ROLLERS PER SIDE 6
LENGTH OF TRACK ON GROUND 4.9 ft in 1499 mm
WIDTH OF TRACK 15 in 381 mm
TRACK GAUGE 3.8 ft in 1143 mm
Loader
OPERATING LOAD 1900 lb 861.8 kg
TIPPING LOAD 3800 lb 1723.7 kg
Hydraulic
PUMP FLOW 17.4 gal/min 65.9 L/min
RELIEF VALVE PRESSURE 3000 psi 20684.3 kPa
Dimensions
WIDTH OVER TRACKS 5 ft in 1524 mm
LENGTH W/ BUCKET 10.7 ft in 3251 mm
LENGTH W/O BUCKET 8.3 ft in 2540 mm
HEIGHT TO TOP OF CAB 6.4 ft in 1956 mm
GROUND CLEARANCE 12 in 305 mm
 
 

 

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>