Up for sale is a one owner low hour Terex Skid loader only showing 323 hours, all up to date on service and just had new tires installed 
Job sight ready this is a 50 hp machine comes with a 63" smooth bucket , open rops, pilot controls, very good smooth running skid steer 
We can ship feel free to call or email with any questions or a price on shipping 
thanks C&C Equipment 812-336-2894 
Below are some specks on the machine and a short video 
We do have 2 of these TSR50 in stock if you need a pair call for a combo price 
we also have 5 other skid steers in stock like the ASV RC60 and Mustang 2054
All machines are sold as is where is with no warranty. Seller makes no guarantees on year or hours on machine. Machines to be paid in full before shipping. Payment to be made in full within 5 days or less by cash, certified funds, or bank wire. Indiana 7% sales tax applies to certain buyers.
Check out my other items!
Loader Arms:  Radial
Operating Weight:  6475 lbs (2937 kg)
Shipping Weight:  5750 lbs (2608 kg)
Tipping Load:  3000 lbs (1361 kg)
Rated Operating Capacity:  1500 lbs (680 kg)
Max Travel Speed:  7.4 mph (11.9 kph)
Max Travel Speed with optional 2 speed transmission:  12 mph (19.3 kph)
Height to Bucket Pin:  115 in (2921 mm)
Dump Height at Bucket Discharge:  87 in (2210 mm)
Dump Reach at Bucket Discharge:  22 in (559 mm)
Maximum Dump Angle at Full Height:  40˚
Bucket Breakout Force:  3900 lbs (1769 kg)
Arm Lifting Force:  3000 lbs (1360 kg)
Rear angle of Departure:  28.3 ˚
Bucket Roll Back at Ground level:  27˚
Ground Clearance
Unloaded:  10.5 in (266.7 mm)
Loaded:  10 in (254 mm)
Overall Length with Bucket:  137 in (3480 mm)
Type:  Diesel, 4-cylinder, Naturally Aspirated
Model:  Perkins 404D-22
Displacement:  135 in3 (2.2 L)
Gross Horsepower @ 2800 rpm:  50 hp (37.3 kW)
Torque Peak:  105 ft-lb (143 Nm)
Cooling System:  Engine-Driven Fan and Coolant/Anti-Freeze Filled Radiator 
Engine Block Heater:  Standard, AC Plug-In Type
Intake Air Cleaner:  Dual Stage
Emissions Controls:  Meets All U.S. EPA Interim Tier 4 Standards
Drive System:  Hydrostatic
Chain Case:  Bow Tie Drive System
Chain Size:  80 ANSI Chain
Wheel Size:  10 x 16.5
Width Over Tires:  66 in (1676 mm)
Tractive Effort:  8453 lbs (3826 kg)
Wheel Base: 40.6 in (1031 mm)
Fuel Tank:  25 gal (95 L)
Hydraulic Tank:  8 gal (30 L)
Engine Coolant/Anti-freeze:  3.5 gal (13 L)
Engine Oil (including filter):  11.2 quarts (10.6 L)
System Pressure, Maximum:  3335 psi (230 bar)
Controls:  Pilot Hydraulic Joystick
Couplers:  3/4 in Flat Faced
Auxiliary Pump Flow:  17.1 gpm (65 lpm)
Normal Charge: 12V
Battery: 950 CCA
Charging System: 65 Amp Alternator
Outlets: 1-12V Port Inside Operator Station
Seat:  Standard seat with an optional adjustable suspension seat available.
Loader Control:  Right-hand pilot hydraulic joystick controls loader lift/tilt, with intermittent control of 
auxiliary hydraulics. 
Drive Control:  Left-hand pilot hydraulic joystick controls machine speed and direction.
Engine speed control:  Foot Throttle
Indicators/Gauges: Fuel, Tachometer, Engine Temperature, Hour Meter, Battery, Two Speed, Oil Level, Hydraulic Temperature, Water Temperature
ROPS/FOPS Meets:  ISO 3471:2008
ISO 6683:2005
ISO 3449:2005 Level 1
Illumination: 2 Forward Facing Lights, 2 Rear Facing Lights



2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>