Up for sale is a one owner low hour Terex Skid loader only showing 465 hours, all up to date on service and just had new tires installed Job sight ready this is a 50 hp machine comes with a 63" smooth bucket , open rops, pilot controls, very good smooth running skid steer We can ship feel free to call or email with any questions or a price on shipping thanks C&C Equipment 812-336-2894 Below are some specks on the machine and a short video We do have 2 of these TSR50 in stock if you need a pair call for a combo price we also have 5 other skid steers in stock like the ASV RC60 and Mustang 2054

SPECIFICATIONS OPERATING SPECIFICATIONS Loader Arms: Radial Operating Weight: 6475 lbs (2937 kg) Shipping Weight: 5750 lbs (2608 kg) Tipping Load: 3000 lbs (1361 kg) Rated Operating Capacity: 1500 lbs (680 kg) Max Travel Speed: 7.4 mph (11.9 kph) Max Travel Speed with optional 2 speed transmission: 12 mph (19.3 kph) Height to Bucket Pin: 115 in (2921 mm) Dump Height at Bucket Discharge: 87 in (2210 mm) Dump Reach at Bucket Discharge: 22 in (559 mm) Maximum Dump Angle at Full Height: 40˚ Bucket Breakout Force: 3900 lbs (1769 kg) Arm Lifting Force: 3000 lbs (1360 kg) Rear angle of Departure: 28.3 ˚ Bucket Roll Back at Ground level: 27˚ Ground Clearance Unloaded: 10.5 in (266.7 mm) Loaded: 10 in (254 mm) Overall Length with Bucket: 137 in (3480 mm) ENGINE Type: Diesel, 4-cylinder, Naturally Aspirated Model: Perkins 404D-22 Displacement: 135 in3 (2.2 L) Gross Horsepower @ 2800 rpm: 50 hp (37.3 kW) Torque Peak: 105 ft-lb (143 Nm) Cooling System: Engine-Driven Fan and Coolant/Anti-Freeze Filled Radiator Engine Block Heater: Standard, AC Plug-In Type Intake Air Cleaner: Dual Stage Emissions Controls: Meets All U.S. EPA Interim Tier 4 Standards DRIVE TRAIN Drive System: Hydrostatic Chain Case: Bow Tie Drive System Chain Size: 80 ANSI Chain Wheel Size: 10 x 16.5 Width Over Tires: 66 in (1676 mm) Tractive Effort: 8453 lbs (3826 kg) Wheel Base: 40.6 in (1031 mm) SERVICE CAPACITIES Fuel Tank: 25 gal (95 L) Hydraulic Tank: 8 gal (30 L) Engine Coolant/Anti-freeze: 3.5 gal (13 L) Engine Oil (including filter): 11.2 quarts (10.6 L) AUXILIARY HYDRAULIC SYSTEM System Pressure, Maximum: 3335 psi (230 bar) Controls: Pilot Hydraulic Joystick Couplers: 3/4 in Flat Faced Auxiliary Pump Flow: 17.1 gpm (65 lpm) ELECTRICAL SYSTEM Normal Charge: 12V Battery: 950 CCA Charging System: 65 Amp Alternator Outlets: 1-12V Port Inside Operator Station OPERATOR STATION Seat: Standard seat with an optional adjustable suspension seat available. Loader Control: Right-hand pilot hydraulic joystick controls loader lift/tilt, with intermittent control of auxiliary hydraulics. Drive Control: Left-hand pilot hydraulic joystick controls machine speed and direction. Engine speed control: Foot Throttle Indicators/Gauges: Fuel, Tachometer, Engine Temperature, Hour Meter, Battery, Two Speed, Oil Level, Hydraulic Temperature, Water Temperature ROPS/FOPS Meets: ISO 3471:2008 ISO 6683:2005 ISO 3449:2005 Level 1 Illumination: 2 Forward Facing Lights, 2 Rear Facing Lights

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>