2004 BOBCAT S-185 SKID STEER LOADER 61HP TURBO DIESEL KUBOTA SUPER NICE !!!!!!!!SOLD!!!!!!!!

Up for sale is a completely gone through 2004 Bobcat S-185 skid steer with 2649 hours , it has been check out from one end to the other, new seals, paint, tires, motor check out , gaskets replaced, it is ready for work, if something was damaged it got replaced. This was a one owner machine that has been taken care of. Machine starts and runs like it should, without any issues. It is straight and clean all over with no dents in sheet metal. It has a Kubota 61 hp diesel engine that has no blowby. The unit is tight and everything works like it should. It has auxiliary hydraulics to run a clam bucket, grapple, etc. The 12x16.5 tires are new. There is no leaks, machine is ready to go to work today. It has the hand and foot Bobcat style controls,

I do have 2 other S185 .1 S160, 2 Mustang 2050, Cat 267 and more coming in daily 
I do have new forks, and grapple buckets attachments also machine weight is 6000lbs 
We can ship this anywhere so call or e-mail for a quote. 812-336-2894 mon-fri 8-4:30 
Indiana 7% sales tax applies to all buyers, unless you are tax exempt, or it is shipped out of state by a third party shipper, not affiliated with you.

Selected Dimensions

Dimensions
A. LENGTH WITH BUCKET 10.9 ft in 3310 mm
B. WIDTH OVER TIRES 5.5 ft in 1676 mm
C. HEIGHT TO TOP OF CAB 6.4 ft in 1938 mm
D. WHEELBASE 3.4 ft in 1030 mm
E. GROUND CLEARANCE 7.5 in 190 mm
F. LENGTH W/O BUCKET 8.5 ft in 2588 mm
G. CLEARANCE AT MAX LIFT AND DUMP 7.6 ft in 2310 mm
H. REACH AT MAX LIFT AND DUMP 29.6 in 753 mm

Specification

Engine
MAKE Kubota
MODEL V2003-M-DI-T
GROSS POWER 56 hp 41.8 kw
POWER MEASURED @ 2800 rpm
DISPLACEMENT 122 cu in 2 L
NUMBER OF CYLINDERS 4
Operational
OPERATIONAL WEIGHT 6220 lb 2821.3 kg
FUEL CAPACITY 24 gal 91 L
OPERATING SPEED 7.3 mph 11.7 km/h
MAX SPEED 11.1 mph 17.9 km/h
Loader
OPERATING LOAD RATING 1850 lb 839.1 kg
TIPPING LOAD 4076 lb 1848.8 kg
BUCKET CAPACITY 0.43 yd3 0.33 m3
Hydraulic
PUMP FLOW CAPACITY 16.9 gal/min 64 L/min
RELIEF VALVE PRESSURE 3300 psi 22752.7 kPa
Dimensions
LENGTH WITH BUCKET 10.9 ft in 3310 mm
LENGTH W/O BUCKET 8.5 ft in 2588 mm
WIDTH OVER TIRES 5.5 ft in 1676 mm
HEIGHT TO TOP OF CAB 6.4 ft in 1938 mm
CLEARANCE AT MAX LIFT AND DUMP 7.6 ft in 2310 mm
WHEELBASE 3.4 ft in 1030 mm
GROUND CLEARANCE 7.5 in 190 mm
REACH AT MAX LIFT AND DUMP 29.6 in 753 mm
TURNING RADIUS FROM CENTER - MACHINE REAR 78.8 in 2001.5 mm

 

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>