2003 Caterpiller CAT 246 SKID STEER LOADER LOW HOURS BUCKET BOBCAT NEW TIRES!!!!!!!!SOLD!!!!!!!!!!

Up for sale is a one owner low hour 2003 Caterpillar 246 Skid loader only showing 1840 hours, all up to date on service and just had new tires installed 
Job sight ready this is a 80 hp machine comes with a factory Cat bucket with teeth , open rops, very good smooth running skid steer with polite controls 
We can ship feel free to call or email with any questions or a price on shipping 
thanks C&C Equipment 812-336-2894 
Below are some specks on the machine and a short video  
we also have 5 other skid steers in stock like the ASV RC60 and Mustang 2054 Terex TSR-50 Bobcat s185 and s160 if you need more then one 
We also have a ton of attachments like forks, grapple buckets, boom lifts, mowers, tillers, buckets and so on 
Call for a combo price 

Selected Dimensions

Dimensions
A. LENGTH WITH BUCKET 11.8 ft in 3596 mm
B. WIDTH OVER TIRES 6 ft in 1829 mm
C. HEIGHT TO TOP OF CAB 6.9 ft in 2092 mm
D. WHEELBASE 3.7 ft in 1134 mm
E. GROUND CLEARANCE 9.3 in 235 mm
F. LENGTH W/O BUCKET 9.2 ft in 2800 mm
G. CLEARANCE AT MAX LIFT AND DUMP 7.9 ft in 2398 mm
H. REACH AT MAX LIFT AND DUMP 23.1 in 587 mm

Specification

Engine
MAKE Caterpillar
MODEL 3034T
GROSS POWER 80 hp 59.7 kw
NET POWER 74 hp 55.2 kw
POWER MEASURED @ 2600 rpm
DISPLACEMENT 183.1 cu in 3 L
ASPIRATION Turbocharged
NUMBER OF CYLINDERS 4
Operational
OPERATIONAL WEIGHT 7230 lb 3279.5 kg
FUEL CAPACITY 23.8 gal 90 L
HYDRAULIC SYSTEM FLUID CAPACITY 13.7 gal 52 L
OPERATING SPEED 7.5 mph 12.1 km/h
MAX SPEED 6.9 mph 11.1 km/h
Loader
OPERATING LOAD RATING 2000 lb 907.2 kg
TIPPING LOAD 3410 lb 1546.8 kg
BUCKET CAPACITY 0.58 yd3 0.44 m3
Hydraulic
PUMP FLOW CAPACITY 21.9 gal/min 83 L/min
Dimensions
LENGTH WITH BUCKET 11.8 ft in 3596 mm
LENGTH W/O BUCKET 9.2 ft in 2800 mm
WIDTH OVER TIRES 6 ft in 1829 mm
HEIGHT TO TOP OF CAB 6.9 ft in 2092 mm
CLEARANCE AT MAX LIFT AND DUMP 7.9 ft in 2398 mm
WHEELBASE 3.7 ft in 1134 mm
GROUND CLEARANCE 9.3 in 235 mm
REACH AT MAX LIFT AND DUMP 23.1 in 587 mm
TURNING RADIUS FROM CENTER - INC BUCKET 86.5 in 2197 mm

 

 
 
 
All machines are sold as is where is with no warranty. Seller makes no guarantees on year or hours on machine. Machines to be paid in full before shipping. Payment to be made in full within 5 days or less by cash, certified funds, or bank wire. Indiana 7% sales tax applies to certain buyers.
Check out my other items!

  

  

 

  

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>