2004 John Deere 450H Crawler Dozer low hours 3730 Hours !! Video!!!!SOLD!!!!!

 
Up for sale is a clean low hour 2005 John Deere 450h  track dozer. This was a one owner machine that has been taken care of. Machine starts and runs like it should, without any issues. It is straight and clean all over with very little dents in sheet metal. It has the 70hp 4045D Deere power tech engine that has no blowby. The Hydro-static transmission operates and turns like it should. Blade is tight also. Undercarriage is at 90% the rails and sprockets are almost new. Meter reads 3730 hours. There is no leaks, machine is ready to go to work today. 
 
machine weight is 16000lbs
We can ship this anywhere so call or e-mail for a quote. 812-336-2894 mon-fri 8-4:30
Indiana 7% sales tax applies to all buyers, unless you are tax exempt, or it is shipped out of state by a third party shipper, not affiliated with you.   
 
 
 

Selected Dimensions

Dimensions
B. WIDTH OVER TRACKS 1.3 ft in 406 mm
C. HEIGHT TO TOP OF CAB 8.5 ft in 2590 mm
D. LENGTH OF TRACK ON GROUND 6.4 ft in 1956 mm
E. GROUND CLEARANCE 1.1 ft in 346 mm
F. LENGTH W/O BLADE 12.9 ft in 3937 mm
Undercarriage
H. STANDARD SHOE SIZE 16 in 406 mm

Specification

Engine
MAKE John Deere
MODEL 4045D
GROSS POWER 73 hp 54.4 kw
NET POWER 70 hp 52.2 kw
POWER MEASURED @ 2200 rpm
MAX TORQUE 223 lb ft 302.3 Nm
DISPLACEMENT 276 cu in 4.5 L
TORQUE MEASURED @ 1200 rpm
NUMBER OF CYLINDERS 4
ASPIRATION Naturally aspirated
Operational
OPERATING WEIGHT 15000 lb 6818 kg
FUEL CAPACITY 36 gal 136 L
COOLING SYSTEM FLUID CAPACITY 4.2 gal 16 L
ENGINE OIL CAPACITY 3.7 gal 14 L
HYDRAULIC FLUID CAPACITY 8.5 gal 32.2 L
POWERTRAIN FLUID CAPACITY 11.3 gal 42.7 L
FINAL DRIVES FLUID CAPACITY 1.7 gal 6.6 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 65 amps
Transmission
TYPE Dual-path, electronic-controlled, hydrostatic drive
MAX SPEED - FORWARD 5 mph 8 km/h
MAX SPEED - REVERSE 5 mph 8 km/h
Undercarriage
GROUND PRESSURE 6.1 psi 42.1 kPa
GROUND CONTACT AREA 2464 in2 15897 m2
STANDARD SHOE SIZE 16 in 406 mm
NUMBER OF SHOES PER SIDE 37
NUMBER OF TRACK ROLLERS PER SIDE 5
TRACK PITCH 6.3 in 159.8 mm
Hydraulic System
PUMP TYPE Gear
RELIEF VALVE PRESSURE 3000 psi 20685 kPa
PUMP FLOW CAPACITY 15 gal/min 56.8 L/min
Standard Blade
WIDTH 7.5 ft in 2286 mm
HEIGHT 32.5 in 826 mm
CAPACITY 1.9 yd3 1.4 m3
BLADE ANGLE (BOTH DIRECTIONS) 25.4 degrees
CUTTING DEPTH 20.8 in 528 mm
Dimensions
LENGTH W/O BLADE 12.9 ft in 3937 mm
WIDTH OVER TRACKS 1.3 ft in 406 mm
HEIGHT TO TOP OF CAB 8.5 ft in 2590 mm
LENGTH OF TRACK ON GROUND 6.4 ft in 1956 mm
GROUND CLEARANCE 1.1 ft in 346 mm

 

 
 

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>