2001 GENIE S80 4X4 TELESCOPIC AERIAL MANLIFT BOOM BOOMLIFT 80 FT DIESEL JLG LIFT!!!!!!!!SOLD!!!!!!!!!!!

UP FOR SALE IS  A NICE LOW HOUR 2001 GENIE S80 ONLY 5320 HOURS, IT IS A TELESCOPIC 80 FT BOOM LIFT, 4X4, DIESEL ENGINE, OSC AXLE, READY TO GO TO WORK. WITH  A 40 FOOT WORK HEIGHT. THIS MACHINE HAS BEEN CLEANED , AND INSPECTED. THIS MACHINE DOSE HAVE SKY POWER 110 VOLT OUT LET IN THE PLATFORM  THERE IS A 8' PLATFORM ON THIS MACHINE.  THE GENIE S80 IS PERFECT FOR OUTDOOR CONSTRUCTION AND INDUSTRIAL APPLICATIONS.  THE COMBINATION OF THE 4X4 AND OSCILLATING AXLE ALLOW THIS UNIT TO GET AROUND THE WORST JOB SITES.  READY TO GO TO WORK!  THIS UNIT IS LOCATED AT OUR SHOP IN UNIONVILLE IN 47468 AND IS AVAILABLE FOR TESTING AND INSPECTION.  MACHINE SPECS ARE LISTED BELOW.  IF YOU HAVE ANY QUESTIONS PLEASE EMAIL OR CALL WITH THEM.  WE HAVE 2 OF THESE AVAILABLE 

WE HAVE OTHER SIZE BOOM LIFTS AVAILABLE LIKE JLG 600S, JLG 400s  

CALL OR EMAIL FOR ANY QUESTION ON THIS MACHINE OF FOR HELP WITH SHIPPING PRICES

WE HAVE OTHER CONSTRUCTION EQUIPMENT AVAILABLE LIKE DOZERS SKID STEERS AND ATTACHMENTS 

THANKS C&C EQUIPMENT 

812-336-2894 

Selected Dimensions

Dimensions
A. OVERALL LENGTH 36.4 ft in 11100 mm
B. OVERALL WIDTH 8.2 ft in 2500 mm
C. OVERALL HEIGHT - MAST LOWERED 8.2 ft in 2500 mm
D. WHEELBASE 9.2 ft in 2800 mm
E. GROUND CLEARANCE 1.3 in 33 mm
Platform
F. MAX PLATFORM HEIGHT 80.1 ft in 24400 mm
G. MAX HORIZONTAL REACH 71.5 ft in 21800 mm

Specification

Engine
MAKE Deutz
MODEL TD2011 L04i
GROSS POWER 74 hp 55.2 kw
FUEL TYPE diesel
Operational
OPERATING WEIGHT 35501 lb 16103 kg
FUEL CAPACITY 34.9 gal 132 L
HYDRAUILC SYSTEM FLUID CAPACITY 39.6 gal 150 L
MAX SPEED 3.5 mph 5.6 km/h
TIRE SIZE 18-625 16PLY
TIRE FILL/TYPE Foam
Platform
MAX WORKING HEIGHT 86 ft in 26200 mm
MAX PLATFORM HEIGHT 80.1 ft in 24400 mm
MAX HORIZONTAL REACH 71.5 ft in 21800 mm
MAX PLATFORM WEIGHT CAPACITY 500.4 lb 227 kg
PLATFORM LENGTH 96.1 in 2440 mm
PLATFORM WIDTH 35.8 in 910 mm
PLATFORM ROTATION 160 degrees
Dimensions
OVERALL LENGTH 36.4 ft in 11100 mm
OVERALL WIDTH 8.2 ft in 2500 mm
OVERALL HEIGHT - MAST LOWERED 8.2 ft in 2500 mm
WHEELBASE 9.2 ft in 2800 mm
TURNING RADIUS 21.7 ft in 6600 mm
GROUND CLEARANCE 1.3 in 33 mm
 

 

 

 

  

 

 

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>