2000 John deere 555g track loader one owner very clean machine low hour!! VIDEO!!!!!!SOLD!!!!!!!!!

Up for sale is a very nice one owner one operator 2000 John Deere 555G track loader with only 4203 hours 

This tractor is all original nothing has been modified or painted very good running, operating, and looking tractor. 
It has the 4045T John Deere turbocharged 90Hp diesel motor 
the 4 in 1 bucket is tight and operates as it should 
The undercarriage is around 60% still has a lot of life left in it.
I have several very low hour dozers in stock so Check out my other items!
below are some videos and specs on this machine
I can ship anywhere so call or email for a price.
any questions let me know 
Thanks C&C Equipment 812-336-2894 

Selected Dimensions

Dimensions
A. LENGTH WITH BUCKET ON GROUND 15.2 ft in 4628 mm
B. WIDTH TO OUTSIDE OF TRACKS 6.4 ft in 1956 mm
C. HEIGHT TO TOP OF CAB 9.2 ft in 2819 mm
E. GROUND CLEARANCE 14.8 ft in 375 mm
G. CLEARANCE AT FULL HEIGHT AND DUMP 8.8 ft in 2670 mm
H. REACH AT DUMP HEIGHT 2.8 ft in 868 mm
Undercarriage
I. TRACK GAUGE 61 in 1550 mm

Specification

Engine
MAKE John Deere
MODEL 4045T
NET POWER 90 hp 67.1 kw
DISPLACEMENT 276 cu in 4.5 L
POWER MEASURED @ 2100 rpm
MAX TORQUE 293 lb ft 397.3 Nm
ASPIRATION Turbocharged
TORQUE MEASURED @ 1300 rpm
NUMBER OF CYLINDERS 4
Operational
OPERATING WEIGHT 21058 lb 9552 kg
FUEL CAPACITY 41 gal 155.2 L
COOLING SYSTEM FLUID CAPACITY 4.5 gal 17 L
ENGINE OIL CAPACITY 3.2 gal 12.3 L
FINAL DRIVE FLUID CAPACITY - EACH 1.7 gal 6.6 L
HYDRAULIC SYSTEM FLUID CAPACITY 19.7 gal 74.5 L
STATIC TIPPING LOAD 13600 lb 6168 kg
BREAKOUT FORCE - STD BUCKET 20250 lb 90 kN
BUCKET CAPACITY - STRUCK 1.3 yd3 0.96 m3
BUCKET CAPACITY - HEAPED 1.5 yd3 1.1 m3
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 95 amps
MAX SPEED 5.8 mph 9.3 km/h
Undercarriage
TRACK SHOE WIDTH 16 in 410 mm
NUMBER OF SHOES PER SIDE 36
NUMBER OF TRACK ROLLERS PER SIDE 6
LENGTH OF TRACK ON GROUND 6.6 ft in 2002 mm
GROUND CONTACT AREA 2522 in2 1.6 m2
GROUND PRESSURE 8.4 psi 57.6 kPa
TRACK GAUGE 61 in 1550 mm
Hydraulic
PUMP TYPE Gear
PUMP FLOW CAPACITY 39 gal/min 148 L/min
RELIEF VALVE PRESSURE 2600 psi 17927 kPa
Dimensions
LENGTH WITH BUCKET ON GROUND 15.2 ft in 4628 mm
WIDTH TO OUTSIDE OF TRACKS 6.4 ft in 1956 mm
HEIGHT TO TOP OF CAB 9.2 ft in 2819 mm
GROUND CLEARANCE 14.8 ft in 375 mm
CLEARANCE AT FULL HEIGHT AND DUMP 8.8 ft in 2670 mm
REACH AT DUMP HEIGHT 2.8 ft in 868 mm

 

  

 

 

 

 

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>