1984 M936A1 6x6 wrecker crane good runner shape 45,000lbs winch 20,000lbs lift !!!!!!!SOLD!!!!!!

Up for sale is a great running 1984 AM General 5 ton M936A1 wrecker truck. It is showing only 25500 miles! and 890 hours of operation. It is also showing a 2006 MWO rebuild, plenty of life left in it. It has the NHC 250 250 hp 6 cylinder Cummins in it which runs great. Behind that is an Allison 5 speed automatic backed by an air shift 2 speed transfer case. All functions, gauges and lights operate fine. It has a front mounted 20,000lbs winch and a 45,000lbs mounted rear winch. The boom has a lift rating of 20,000lbs and it extends out to 18' and up to a 45 degree angle. It also rotates 360 degrees. It comes as seen in the pictures . Paint is in Ok condition some rust but nothing to bad, interior is good, the 1100R 20 tires are in very good shape. The 6 wheel drive works also. I have used these wreckers in the past and they are very handy and strong. They will pull and lift more than what they are rated for. truck weight is 37,000lbs It does have full air brakes on it You are more than welcome to come inspect the truck mon-fri 8am-4:30pm 812-336-2894 and on the weekend by appointment only. These newer 900 series wreckers dont come up for sale everyday so don't miss out on this one. we can ship this to you in the lower 48 states figure around $2.50+/- a loaded with a $650 minimum I do have a new M936A2 in stock at this time with very low hours and very clean all over also We do have over 30 2.5 and 5 ton trucks in stock at all times. We also carry new and used parts for the 2.5 and 5 ton trucks we can add a hard top to this for $1750 extra call us or e-mail us for any questions 812-336-2894 Clean and clear Indiana title feel free to call or email with any questions If you are looking for a good operating wrecker and not worried about looks to much this is the truck for you! Ready to be put in to action!! I can ship anywhere in the US call or email for a quote Thanks C&C Equipment 812-336-2894 I have over 50 5 ton and 2.5 ton truck in stock call or email for more info M923 M925 M931 M35a2 M35A3 M816 M818

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>