1988 Unimog Fl419 See tractor 2004 rebuild Good shape! !!!!!SOLD!!!!!!!!!

Up for sale is one military SEE tractor (small emplacement excavator) This was made by the Freightliner corporation for Mercedes-Benz. These are based on the same model as the 419 Unimog. This is unit #450878. It was built in 1988 It shows 7690 miles and 33 hours. with a 2004 government rebuild. This unit has been checked out in our shop by undergoing a service checklist. All fluids have been checked, replaced, topped off as needed. This is a very clean unit ready to be put to work one of the nicer ones I have at this time. These unique pieces can do a variety of jobs in one compact unit. On the front of the truck is a front end loader bucket with teeth for moving materials and loading trucks. It is rated at .75 cubic yards, the lift height is 98″ it will lift 3,300lbs, and the breakout force is 6,000lbs. On the rear is a Case backhoe attachment with many uses. It can dig up to 14′ deep with a reach of over 17′. It has a 10,000lbs break out force. You can dismount the front end loader and the backhoe making a small very agile truck. The truck also has aux. hydraulics for running a variety of tools like a jack hammer, rock drill, impact, chain saw, and all other kinds of attachments. I do have a few attachments available for extra if you buy a truck. The Mercedes 6 cylinder inline 346 cubic inch diesel runs strong and is rated at 110 hp. Behind that is a 16 speed transmission for all kinds of gear speeds. Top speed rated by the military is 50mph, but its not safe to go that fast if it will with all the attachments on. 35-40 mph is a safe top speed with the attachments on or you can go 45-50 mph with them off. It also has disc brakes. The 4×4 system works fine, the front and rear differential will lock together providing true 4 wheel drive. The truck is sitting on Michelin like new XL’s 12.5-20 tires. The truck has new military spec batteries in it and is ready to go. All major functions have been tested and work properly. Truck has no major leaks, it may leak out a drip or two overnight from the hydraulic system, or it may not. I am just thing to be honest. The interior of this truck is in goods condition. The truck has a PTO for the hydraulic pump only, no extra pto is at the rear of the truck. It has hyd. power to the rear of the truck also when the backhoe is removed. All in all these are a rare nice tractor with a whole bunch of uses. These are being sold as a tractor with a bill of sale only. Indiana 7% sales tax applies if you are a Indiana citizen, or if you travel from out of state and pick it up yourself. If it gets shipped out of state by a third party shipper no affiliated to you than its tax exempt meaning you don’t pay tax. These are the rules no exceptions. All machines are sold as is where is with no warranty. Seller makes no guarantees on machine. Machines to be paid in full before shipping. shipping weight is 16,000lbs. Payment to be made in full within 5 days or less by cash, certified funds, or bank wire. Any questions you can call 812-336-2894. I can also ship this truck anywhere to you. In the lower 48 states it will run about $2.25 a loaded mile from 47468. I have 5 others available if you need a fleet of these , and used parts also. The one in the pictures is what you are getting. These are very hard to come by so don’t miss out on a rare piece. I do have one set of the hydraulic tools and a few chain saws available for purchase I also have a auger set up for the front hydraulics that takes the place of the bucket for drilling holes in the ground I also have many other military surplus trucks and parts for sale. I have years of experience with these as we have sold over 60 units in the past. Call or email with any questions Thanks C&C Equipment 812-336-2894

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>