1988 M929A1 Dump truck Low miles nice truck

Up for sale is a clean great running 1988 AM General 5 ton M929A1 dump truck. It is showing ONLY 7245 miles and 338 hours of operation and It has a 2004 rebuild , plenty of life left in it very clean truck, it has 48,000 lbs rears axles spring and 20,000 front axle springs, very stout truck. Pay load of 15-20 tons. It has the NHC250 250 hp 6 cylinder Cummins in it which runs great. Behind that is an Allison 5 speed automatic backed by an air shift 2 speed transfer case. All functions like heat and lights operate fine. The paint is a new military spec 3 color camo, interior is in good shape, the 1100r20 tires are 95% The 6 wheel drive works also. I have used these dump trucks in the past and they are very handy and strong will dump more then you can put it in. The hoist goes up high to make a nice steep dump angle so the cargo comes out easy. 6 wheel drive makes these a perfect truck for that soft or muddy job. It does have full air brakes on it You are more than welcome to come inspect the truck Mon-Fri 8am-4:30pm 812-336-2894 and on the weekend by appointment only. These newer 900 series dump trucks don't come up for sale everyday so don't miss out on this one. We can ship this to you in the lower 48 states figure around $2.50+/- a loaded with a $650 minim , We have several more military trucks we can build to your needs, bed size, paint, and so on. We do have over 30 2.5 and 5 ton trucks in stock at all times. We also carry new and used parts for the 2.5 and 5 ton trucks We can add super single tires for $3000 call us or e-mail us for any questions 812-336-2894 this truck comes with a clean and clear Indiana

>

feel free to call or email with any questions
I can ship anywhere in the US call or email for a quote
Thanks C&C Equipment
812-336-2894
I have over 50 5 ton and 2.5 ton truck in stock call or email for more info
M923 M925 M931 M35a2 M35A3 M816 M818

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>