Caterpillar BH160 Backhoe Excavator Skid Steer Attachment Cat 279

Up for sale is a very lightly used Caterpillar BH160 back hoe attachment
Was told only 20 hours of use and it looks to be true very little scratch in original paint and bucket
Has been stored inside
Comes with a cat 16" bucket only
It does have hyd to run a thumb
It has been checked out and functions as it should
A must have piece if you have a Caterpillar skid steer
It should fit other machines but check with your local dealer to be sure
Call or email for a shipping quote
Indiana residents and picked up in person will have to pay Indiana sales tax unless tax exempt
Thanks C&C Equipment
I do have Caterpillar skid steers and other attachments for sale also

Used in typical backhoe applications such as digging footings, basements, and drainage ditches, utility trenching, back-filling, and maintaining slopes and embankments in construction, industrial, and landscaping settings.
Maximum Digging Depth 121.0 in
Operating Weight 2309.0 lb
Overall Length 116.0 in
Stabilizer Spread (operating position) 74.0 in
Digging Depth at 610 mm (2 ft) 120.0 in
Digging Depth at 4220 mm (8 ft) 102.0 in
Straight Wall Digging Depth 81.0 in
Overall Operating Height 136.0 in
Loading Height 85.0 in
Loading Reach 64.0 in
Reach From Swing Pivot (at ground) 156.0 in
Swing Arc 180 degrees
Bucket Rotation 192 degrees
Bucket Breakout Force 7146.0 lb
Stick Breakout Force 3439.0 lb
Boom Pivot Height 17.0 in
Ground Clearance 3.4 in
Transport Height 92.0 in
Transport Width 79.0 in
Required Hydraulics Standard Flow
Required Hydraulic Flow 42-86 L/min (11-23 gpm)
Optimal Hydraulic Pressure 145-235 bar (2100 - 3400 psi)
Total Side Shift Travel 38.0 in

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>