2002 John Deere 160LC Excavator ONE OWNER!!

Up for sale is a 2002 Deere 160LC Excavator!!

This is a Very clean one owner machine 10,000 hours Very well maintained

Under carriage is around 75%

Way Above average shape for year and hours

48" 1.30 cubic yard bucket

109 Hp 4045H John Deere Power Plant 

Comes in weighing 37500Lbs 

We just went through it and painted it back to JD yellow Ready for work!

Any questions let us know Thanks C&C Equipment 812-336-2894





Make John Deere
Model 4045H
Net Power 109 hp 81.3 kw
Power Measured @ 2300 rpm
Displacement 276 cu in 4.5 L
Torque Measured @ 1400 rpm
Max Torque 302 lb ft 409.5 Nm
Number of Cylinders 4
Aspiration Turbocharger and air-to-air charge air cooler
Operating Weight 35620.1 lb 16157 kg
Fuel Capacity 74 gal 280.1 L
Cooling System Fluid Capacity 7 gal 26.5 L
Hydrauilc System Fluid Capacity 44.9 gal 170 L
Engine Oil Capacity 3.7 gal 14 L
Swing Drive Fluid Capacity 1.2 gal 4.5 L
Operating Voltage 24 V
Alternator Supplied Amperage 45 amps
Hydraulic System Relief Valve Pressure 4980 psi 34335.9 kPa
Hydraulic Pump Flow Capacity 78.2 gal/min 296 L/min
Swing Mechanism
Swing Speed 13.6 rpm
Swing Torque 29850 lb ft 40471.2 Nm
Number of Shoes per Side 43
Shoe Size 23.6 in 600 mm
Number of Carrier Rollers per Side 2
Number of Track Rollers per Side 7
Ground Pressure 5.5 psi 37.6 kPa
Max Travel Speed 3.3 mph 5.3 km/h
Drawbar Pull 33670 lb 149.8 kN
Track Gauge ft in mm
Reference Bucket Capacity 1 yd3 0.78 m3
Minimum Bucket Capacity 0.65 yd3 0.5 m3
Maximum Bucket Capacity 1.7 yd3 1.3 m3
Boom/Stick Option (HEX) 1
Boom/Stick Option (HEX) 1 Arm Length 8ft. 6in. (2.60m )
Shipping Height of Unit 9.4 ft in 2880 mm
Shipping Length of Unit 28 ft in 8530 mm
Max Digging Depth 19.2 ft in 5850 mm
Max Reach Along Ground 28.1 ft in 8570 mm
Max Cutting Height 28.7 ft in 8738.6 mm
Max Loading Height 20.7 ft in 6300.2 mm
Max Vertical Wall Digging Depth 16.5 ft in 5029.2 mm
Boom/Stick Option (HEX) 2
Boom/Stick Option (HEX) 2 Arm Length 10ft. 2in. (3.10m)
Shipping Height of Unit 9.4 ft in 2880 mm
Shipping Length of Unit 28.1 ft in 8560 mm
Max Digging Depth 20.9 ft in 6360 mm
Max Reach Along Ground 29.6 ft in 9030 mm
Max Cutting Height 29.5 ft in 8991.6 mm
Max Loading Height 21.4 ft in 6528.8 mm
Max Vertical Wall Digging Depth 18.3 ft in 5562.6 mm
Width to Outside of Tracks 8.5 ft in 2590 mm
Height to Top of Cab 9.4 ft in 2880 mm
Ground Clearance 1.5 ft in 470 mm
Counterweight Clearance 3.3 ft in 1000 mm
Tail Swing Radius 8 ft in 2440 mm
Length of Track on Ground 10.2 ft in 3100 mm

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>