1998 M1078 Stewart and Stevenson 4x4 cargo truck Low Miles

Up for sale is a super clean great running 1998 LMTV M1078 Stewart and Stevenson 4x4 Cargo truck!. It is showing only 19771 miles! This is a good solid ready to use SUPER CLEAN truck, Would make the ultimate landscaper truck! We did not paint it just touched a few spots up, it was this clean from the government, This truck will last for years and years, It has a 12 foot drop side bed, It has the Caterpillar 6.6L 3116 turbo diesel power plant in it which runs great. Behind that is an Allison 7 speed automatic backed by a transfer case that you can select 30-80 or 50-50 4x4 functions. All functions and lights operate fine. Paint is in good condition little to no rust , interior is good shape, the 395/85R20 radial tires 90%. The 4 wheel drive as it should . I have used these trucks in the past and they are very handy smooth and strong easy to drive. They will pull and haul more then they are rated for. It has a auto cab tilt feature that make it easy to work on the engine. Also has adjustable suspension with Central tire inflation. You are more than welcome to come inspect the truck mon-fri 8am-4:30pm 812-336-2894 and on the weekend by appointment only. These newer LMTV series trucks don't come up for sale everyday so don't miss out on this one. we can ship this to you in the lower 48 states figure around $2.50+/- a loaded with a $650 minimum . We also carry new and used parts for the 2.5 and 5 ton trucks. call us or e-mail us for any questions 812-336-2894 Title has been applied for and will be in hand in 30 days or less
feel free to call or email with any questions
I can ship anywhere in the US call or email for a quote
Thanks C&C Equipment

I do have dump kits available for this truck

I have over 50 5 ton and 2.5 ton truck in stock call or email for more info
M923 M925 M931 M35a2 M920 M35A3 M816 M818

2.5 Ton Parts

C&C has a huge inventory of almost every part needed to complete your “Deuce-and-Half” project. We can help you with everything from custom, hard to find parts to com-mon light switches. Please take a look and email us if you donʼt see what you need. We can and will help you! >>

5 Ton Parts

C&C Equipment has extensive experience with heavy trucks and can help you operate and maintain you equipment. We offer a complete line of heavy truck parts for every thing from 5 ton cargo trucks like the M813 or M923 to the largest military over the road semis. Take a look here for all your heavy truck parts. >>

AVM Locking Hubs

Founded in 1957, AVM has been active during all these years developing, producing and marketing Free-Wheeling Hubs, applicable to 4-wheel-drive and sport-utility vehicles. >

Jeep Parts

Full line of common and hard to find Jeep parts for everything from M38 to M151. We stock engine, drivetrain and body parts along with a large supply of electrical components. >>

Utility/CUCV Parts

We have a large selection of truck parts for the CUCV line as well as some of the later 5/4 ton jeep trucks in the 715 line used by the military. Parts include electrical, engine and drivetrain, as well as most other common military components. >>